Bunn016 disinfection and sterilization product specification

● dual efficient disinfection and purification technology enabling
● all round disinfection and purification of air and inner wall in the ladder
● human machine coexistence to realize real-time disinfection and purification during operation
● ultra thin design, convenient installation and maintenance
● global insight, intelligent biometrics
● optional installation of Internet of things function

 
（2） Overall dimension

（3） Installation mode
After connecting the adapter to the sterilizer (as shown in the figure below), connect the 220V power supply to the other end, press the power switch, and the sterilizer can work normally.

1. Surface mounted
Drill a bottom hole at the position 150 mm from the top of the car side wall.
(reserved top wiring and operation space)
Note: the recommended plate thickness of 1.5 ~ 1.8 is 4.5mm for the positioning bottom hole; The plate thickness positioning hole of 1.8 ~ 2.5 is 4.6.
Remove the 3M adhesive tape release paper on the back of the sterilizer.
2. Wall mounted
Align the ear hole on the disinfection top with the positioning bottom hole, and stick the disinfection machine to the wall. And slowly screw in the self tapping screw with a tool (electric screwdriver + hexagon socket).
※ the torque is also different according to different plate thickness and materials. It is generally adjusted from small to large to avoid breaking the screw due to excessive torque.

 
3. Main accessories
After connecting the adapter to the sterilizer (as shown in the figure below), connect the 220V power supply to the other end, press the power switch, and the sterilizer can work normally.
It can be connected to elevator console and remote IOT platform to realize one key switch and remote maintenance of hundreds of equipment, and reduce the cost of manual patrol inspection and maintenance.
Three control modes:
（5） Performance parameters

（6） Related tests